Xtreme Power Conversion P80g User & Installation Manual page 21

P80g User's Manual
04: Maximum Charger Current Setting
Interface
05: LCD Display Direction Setting
Interface
06: Autonomy Limitation Setting
Interface
Xtreme Power Conversion Corporation
All manuals and user guides at all-guides.com
Setting
Set up the maximum charger current.
1/2/4/6/8: Setting the maximum charger current at
1/2/4/6/8A (Default: 8A).
Note: This setting is only effective for super charger.
Setting
RAC: the LCD display is horizontal.
TOE: the LCD display is vertical.
Setting
Parameter 2: Set up backup time on battery mode for
general outlets.
0-999: setting the backup time in minutes from 0-999
for general outlets on battery mode.
DIS: Disable the autonomy limitation and the backup
time will depend on battery capacity. (Default)
Note: When setting is "0", the backup time will be only
10 seconds.
Uninterruptible Power Supply
Page 21