Mini-Pcie Port/Mini-Pcie 端口/Mini-Pcie 埠; Usb Recovery Mode/Usb 更新模式/Usb 更新模式 - Advantech MIC-715 User Manual

Ruggedized ai inference system based on nvidia jetson xavier nx

Table of Contents

2.2.8

mini-PCIE Port/mini-PCIE 端口 /mini-PCIE 埠

MIC-715 provides 2 pcs mini-PCIE port internally.

MIC-715 在本机内部提供 2 组 mini-PCIE 端口。

MIC-715 在本機內部提供 2 組 mini-PCIE 連接埠。

2.3

USB Recovery Mode/USB 更新模式/USB 更新模式

To update your MIC-715, you must be in Force USB Recovery Mode. When in Force

USB Recovery Mode, you can update system software and write partition configura-

tion to the device.

Please prepare one HOST PC. (About more HOST PC detail, please refer to

software update SOP)

Before flashing MIC-715, you must turn MIC-715 into Force Recovery Mode

manually.

(a) Shut down the MIC-715.

(b) Connect HOST PC and MIC-715 Internal Micro USB with USB cable.

(c)

Press and hold internal SW_REC1 button.

(d) Press SW_RST1 button.

(e) After 5s release the SW_REC1 button.

Make sure MIC-715 is recognized by HOST PC successfully:

Type command: lsusb in HOST PC. If you see: NVIDIA Corp. It means MIC-715

is in recovery mode.

* Root password of MIC-715: mic-715

如果需要更新 MIC-715，你必须要让 MIC-715 进入 USB 更新模式。在 USB 更新模式下，

你可以更新系统的软件以及将系统写入相关的参数设定。

请准备一台 HOST 系统。( 关于 Host 系统的细节，请参阅软件更新指南 )

在更新 MIC-715 之前，你必须手动让 MIC-715 进入 USB 更新模式。

(a) 请将 MIC-715 关机。

(b) 透过 Micro USB 线材连接 HOST 系统与 MIC-715 内部的 Micro USB 端口。

MIC-715

User Manual

Table of Contents