Important Information - Air Techniques F3700T Instruction Manual

General Notes.
 All instructions in this manual form an integral part of the unit . They must be kept close to
the unit and in readiness whenever required . Precise observance of these instructions is a
pre-condition for use of the unit for the intended purpose and for its correct operation . This
manual should be passed on to any future purchaser or operator .
 Safety of the operator as well as trouble-free operation of the unit are only ensured if use is
made of original equipment parts . Moreover, use may only be made of those accessories
that are specified in the technical documentation or that have been expressly approved and
released by the manufacturer for the intended purpose . The manufacturer cannot warranty for
the safety or proper functioning of this unit in the case where parts or accessories are used that
are not supplied by the manufacturer .
 There is no guarantee against damage arising where parts or accessories are used that are not
supplied by the manufacturer .
 Observe the usage and storage conditions .
 Appliances which accumulate condensation or become wet through a change of temperature may only
be operated after they are fully dry again .
 The manufacturer regard themselves as being responsible for the equipment with regard to safety,
reliability and proper functioning only if assembly, resetting, changes or modifications and
repairs have been carried out by an authorized dealer and if the equipment is used in conformity
with the instructions contained in this manual .
 The device conforms to the relevant safety standards valid at this time .
Correct Usage
 Operation of ScanX may only be carried out by suitably qualified personnel .
 ScanX is only to be used in the processing of exposed PSPs .
 If the device is stored in a cool environment and brought to a warmer one, condensation
can build up . Do not connect the device until it has warmed up to room temperature and is
absolutely dry .
 The immediate working area should be free of all possible interferences (e .g . strong magnetic
fields), as these could affect the operation .
 ScanX may only be operated together with authorized software .
 Correct usage includes observing all adherence to the set-up, operation and maintenance
instructions .
 Any use, above and beyond that described in this manual as correct usage, will invalidate the
warranty .
Incorrect Usage
 Any use that is not described in this manual as correct usage is considered as incorrect usage . The
manufacturer is not to be held liable for any damage caused as a result of incorrect usage . The
operator bears all risks .
Air Techniques, Inc.

IMPORTANT INFORMATION

Classic & Intraoral
Page 7