Before Locating The Fixing Brackets; Adjusting The Bracket Position - Philco PHD 64 SB Owner's Manual

9.4 Before locating the fixing brackets

The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the
controls protruding from the hob.

9.5 Adjusting the bracket position

Fix the hob on the work surface by screw 2 brackets on the bottom of hob(see picture) after installation.
Adjust the bracket position to suit for different table top thickness.
Bracket
HOB
TABLE
BRACKET
Under any circumstances, the brackets cannot touch with the inner surfaces of the worktop after installation
(see picture).
EN - 24
Copyright © 2019, Fast ČR, a. s. Revision 05/2020