Table of Contents
Advertisement
Ramp Wave Output
A program example of ramp wave output is shown in
used to apply ramp wave voltage and monitor the output voltage.
Table 2-9
Selects source function
Selects arbitrary waveform output
Selects ramp wave output
Sets ramp wave start level
Sets ramp wave end level
Sets ramp wave start time
Sets ramp wave ramp time
Sets ramp wave end time
Sets measurement function
Sets aperture time in seconds or by
using NPLC value
Sets limit (compliance) value
Selects trigger source
Sets interval of timer trigger
Sets trigger count
Sets trigger delay time
Keysight B2961B/B2962B Programming Guide, Edition 1
Commands for Applying and Monitoring the Ramp Wave
Function
Table
Command
[:SOUR[c]]:FUNC:MODE v-or-c
[:SOUR[c]]:v-or-c:MODE ARB
[:SOUR[c]]:ARB:FUNC RAMP
[:SOUR[c]]:ARB:v-or-c:RAMP:STAR level
[:SOUR[c]]:ARB:v-or-c:RAMP:END level
[:SOUR[c]]:ARB:v-or-c:RAMP:STAR:TIME time
[:SOUR[c]]:ARB:v-or-c:RAMP:RTIM time
[:SOUR[c]]:ARB:v-or-c:RAMP:END:TIME time
:SENS[c]:FUNC "func"[, "func"[, "func"]]
:SENS[c]:func2:APER time
:SENS[c]:func2:NPLC value
:SENS[c]:v-or-c:PROT value
:TRIG[c]<:ACQ | :TRAN | [:ALL]>:SOUR source
:TRIG[c]<:ACQ | :TRAN | [:ALL]>:TIM time
:TRIG[c]<:ACQ | :TRAN | [:ALL]>:COUN value
:TRIG[c]<:ACQ | :TRAN | [:ALL]>:DEL time
Programming Examples
Ramp Wave Output
2-10. This example is
57
Advertisement
Table of Contents
