Table of Contents
Advertisement
Using Program Memory
A program example for using program memory is shown in
example is used to store a program in the program memory and execute it.
Table 2-29
operation is RUN to change to the running status, PAUS to change to the paused
status, CONT to change to the running status, STOP to change to the stopped
status, or STEP to perform step execution.
Keysight B2961B/B2962B Programming Guide, Edition 1
Program Memory Commands
Function
Returns the names of all programs defined in
the program memory
Specifies memory program
Defines memory program
Adds program code to the end of the memory
a
program
Sets a value to the variable specified by n
Executes memory program
Changes status of memory program
Blocks other commands until the program
execution status changes to Paused or
a
Stopped
Deletes a memory program
Deletes all memory programs
a. This function is effective for the memory program previously specified by the :PROG:NAME command.
b. Variables can be used in the memory program. They must be expressed as %n% (n: integer. 1 to 100) in the
memory program.
:PROG:CAT?
:PROG:NAME "name"
:PROG:DEF program_code
a
:PROG:APP program_code
:PROG:VARn "value"
b
:PROG:EXEC
a
:PROG:STAT operation
a
:PROG:WAIT? timeout_in_seconds
:PROG:DEL
a
:PROG:DEL:ALL
Programming Examples
Using Program Memory
Table
2-30. This
Command
97
Advertisement
Table of Contents
