Jumper Settings - Supermicro X11DPI-N-O User Manual

Super X11DPi-N(T) User's Manual

2.7 Jumper Settings

How Jumpers Work
To modify the operation of the motherboard, jumpers can be used to choose between optional
settings. Jumpers create shorts between two pins to change the function of the connector.
Pin 1 is identifi ed with a square solder pad on the printed circuit board. See the diagram
at right for an example of jumping pins 1 and 2. Refer to the motherboard layout page for
jumper locations.
Note: On two-pin jumpers, "Closed" means the jumper is on and "Open" means the
jumper is off the pins.
3 2 1
Connector
Pins
Jumper
3 2 1
Setting
56