Table of Contents
Advertisement
Inspection, Maintenance & Cleaning
Always unplug the Power Cord from the electrical outlet before performing any inspection,
adjustments, maintenance and/or cleaning.
BEFORE EACH USE: Inspect the general condition of the Lift. Check for loose screws, misalignment
or binding of moving parts, broken parts, damaged electrical wiring and hoses, and any other condition
that may affect its safe operation. If abnormal noise or vibration occurs, have the problem identified and
corrected before further use. Do not use a damaged equipment.
DAILY: With compressed air or vacuum, remove all dirt and debris from the Lift. Also, use a detergent
or mild solvent to remove oil and grease from the unit. Then, use a premium quality, machine oil to
lubricate all moving parts.
MONTHLY: With the lift fully lowered, check the level of hydraulic oil in the Reservoir Tank is close to the
Max Fill Line. If not, remove the Fill Cap and add premium quality hydraulic oil until the level of oil is
even with the Max Fill Line. After filling, place the Fill Cap to Reservoir Tank.
Never Add Hydraulic Fluid while Lift is in raised position!!
The hydraulic oil is recommended to be replaced every two years. The inside corners of
the column & lift arms should be re-greased with general-purpose axle grease every
year, or as becomes necessary.
15
MSC-6KLP
Sep 2022
Advertisement
Table of Contents
