Tilt Lift Storage; Manual Handle & Adapter; Inspection, Maintenance & Cleaning; Before Each Use - IDEAL 7000TLX Assembly & Operation Manual

Tilt Lift Storage

·
The iDEAL 7000TLX comes standard with Wall Storage Brackets.
Brackets are designed to support full weight of the Tilt Lift.
·
Mounting hardware is purposely not included, allowing the customer
the ability to choose the type of wall anchoring hardware that is best
for their wall mounting application. Wall Bracket holes allow for 1/4"
mounting hardware.
·
Wall Bracket spacing should be positioned to the inside section of
tubular lift frame, as shown below. The Tilt Lift can also be carefully leaned against wall.
·
Carefully raise Tilt Lift to an upright position, with Gear Boxes on top. Lift & position Tilt Lift onto Wall
Brackets so that the lift is supported by the tubular lift frame between the gear boxes, circled below.
Manual Handle & Adapter
·
The Manual Handle & Socket Adapter can conveniently be used in place of the Power Drill or in cases
of power outages and/or when power may not available.
INSPECTION, MAINTENANCE & CLEANING
Always unplug the Power Cord from the electrical outlet before performing any inspection,
adjustments, maintenance and/or cleaning.
BEFORE EACH USE: Inspect the general condition of the Drill, Lift & Jack Stand. Check for loose
screws, misalignment or binding of moving parts, broken parts, damaged electrical wiring, and any
other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the
problem identified and corrected before further use. Do Not Use Damaged Equipment.
DAILY: With compressed air or vacuum, remove all dirt and debris from the Lift. Also, use a mild
detergent or cleaner to remove oil and grease from the unit.
MONTHLY: While the factory has pre-greased the Gear Drive Boxes & Drive Screw Bars, we
recommend that you periodically check and add white lithium grease as required. Grease is designed
to reduce friction of the gears and screw drives internally.
The iDEAL 7000TLX conveniently has Grease Zerks applied to the top each Gearbox for
the ease to add grease, when required.
Depending on how often you use the Lift, you should check Gear Drive Box periodically to
ensure there is enough lubrication to keep friction, wear & tear to a minimum.
For iDEAL Technical Assistance, please call 877-558-9337.
13
TLX-7000
Aug 2021