IDEAL MSC-6KLP Installation & Operation Manual page 10

STEP 5
Remove the lock pin on the pallet jack (Fig. 10). Place steel ball on the top of the jack ram (Fig.11)
Fig. 10 Fig. 11
Insert the ram into the hole of the base plate (Fig. 12). Lock the ram by threaded pin (Fig.13). Adjust
the length of the ram. (Fig. 14 & 15)
Fig. 12 Fig. 13 Fig.14
Put the slot of the bearing into the bracket (Fig. 16) then lock it by bolt (Fig. 17 & 18).
Fig. 15 Fig. 16 Fig. 17 Fig. 18
The Base Plate with Pallet Jack Assembly is now Complete.
10
MSC-6KLP
Sep 2022