Backyard Creations 273-0843 Instruction Manual

Backyard Creations 273-0843 Instruction Manual

Steel bench with foldable table

Advertisement

INSTRUCTION MANUAL: SKU#273-0843 STEEL BENCH WITH FOLDABLE TABLE
CAUTION: Read all instructions before assembly. Failure to do so may result in faulty assembly and potential
injury.
Important information:
1. To put the bench together it is recommended that you have one other person help you.
2. Assemble on a soft, non-abrasive surface, such as carpet or cardboard to avoid damaging the item.
3. Please don't tighten the bolts too tightly. Fasten nuts and washer to bolt by hand initially. After all parts have been
put together go back and tighten each nut on each bolt to completed installation.
4. For a more satisfying appearance please install with bolt head on the outside of bench parts with the thread on the
inside parts.
5. It is recommended to store the bench under critical weather and use an outdoor cover (sold separately) to extend
the life of the product.
6. For safety, we recommend that you check the bolts regularly and tighten them.
7. The product contains small parts, please keep children away when installing.
Noted: Identify all parts packed in carton against the parts list. Remove all the protective material carefully and DO NOT
use a knife to prevent scratching the surfaces. USE ONLY ON LEVEL SURFACES. INSPECT VISUALLY BEFORE EACH USE
AND ENSURE ALL HARDWARE IS PROPERLY TIGHTENED.
CUSTOMER SERVICE: For questions, assistance or repair parts, please call toll free at: 1-800-505-8305 (M-F 9:00am-
5:00pm Eastern Time) or visit us on the web
www.americancustomerservice.com
REF.
A
Armrest
B
Seat
C
Backrest
D
Short Bolt
E
Long Bolt
F
Washer
G
Nut
24 hours a day.

PARTS LIST

PARTS
IMAGE
NAME
QTY
2
1
1
4
4
16
8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 273-0843 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Backyard Creations 273-0843

  • Page 1 INSTRUCTION MANUAL: SKU#273-0843 STEEL BENCH WITH FOLDABLE TABLE CAUTION: Read all instructions before assembly. Failure to do so may result in faulty assembly and potential injury. Important information: 1. To put the bench together it is recommended that you have one other person help you.
  • Page 2 For missing parts, please call toll free customer Nut Cap service number 1-800-505-8305 (M-F 9:00am- 5:00pm Eastern Time) for further assistance. Allen Wrench Wrench ASSEMBLY INSTRUCTIONS STEP ONE: AFFIX SEAT TO ARMREST • With help of one other person, carefully hold Seat (B) in place and align with holes in Armrest (A).
  • Page 3 4. Now your table is ready to use! of the middle table. BACKYARD CREATIONS® MANUFACTURER‘S WARRANTY (Limited 1-Year Warranty) This product is covered under the manufacturer’s one year limited warranty against defects in workmanship and materials. If your product fails structurally during normal use within one year of purchase, the manufacturer will repair or replace the defective unit at no charge.

Table of Contents