Backyard Creations L-BC217PST Assembly Instructions

Backyard Creations L-BC217PST Assembly Instructions

80 qt rolling ss cooler

Advertisement

80 QT Rolling SS Cooler
Model: L-BC217PST
SKU: 2720855
Congratulations on your purchase of our SUNJOY 80 QT Rolling SS Cooler. Our clear, easy to follow,
step-by-step instructions will guide you through the assembly process from start to finish.
WARNING:
●Keep all children and pets away from assembly area. Children and pets should be supervised when they are
in the area of the Cooler construction.
● Keep assembly area at least 6ft/1.8m from any obstruction such as a fence, garage, house, overhanging
branches, laundry line or electrical wires.
●Protect parts during assembly by laying them on a non-abrasive surface such as blankets or cardboard.
● Some parts may contain sharp edges. When assembling and using this product, basic safety precautions
should always be followed to reduce the risk of personal injury and damage to the product. Please read all
instructions before assembly and use.
● Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them secure!
● Assemble on level ground.
CARE AND MAINTENANCE:
Before using, clean the cooler completely with a soft dry towel, take off the lid and put drinks and ice into the
cooler.
Drain away all the water in the cooler, clean and dry the cooler completely with a soft towel after use.
Indoor storage preferred while not in use.
Made In China
Production Number:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L-BC217PST and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Backyard Creations L-BC217PST

  • Page 1 80 QT Rolling SS Cooler Model: L-BC217PST SKU: 2720855 Assembly Instructions Congratulations on your purchase of our SUNJOY 80 QT Rolling SS Cooler. Our clear, easy to follow, step-by-step instructions will guide you through the assembly process from start to finish.
  • Page 2 Parts List Parts Parts Part# Part# P40107A23000 P90306A01002 Knob Caster with brake Drain Plug(pre-assembled) P40402A23000 P40110A23000 Hex Bolt M6*12 ( packed in a hardware Body P40003A23000 H21012C11 pack, in cap catcher E ) P40203A23000 H09012C12 Handle BB Plus Screw M6*12 ( preassembled ) Bottle Opener P40108A23000 CC Plus Screw M5*25...
  • Page 3 Step 4: Turn the assembled piece upright. Attach Step 3: Remove BB from , then the Body first bottle opener (E) to body (C) by screw (BB) as Fig.4.1. connect the Handle (D) to the Body (C) by Then hang cap catcher (F) to body (C) as Fig.4.2. Screw (BB).

This manual is also suitable for:

2720855

Table of Contents