Removal Of Analysis Block/Synthesis Block/Synthetic Mirror - Panasonic PT-DZ13KU Service Manual

2. 6. Removal of Analysis Block/Synthesis Block/Synthetic Mirror
1. Remove the Lamp Unit according to the section 2.2. "Removal of Lamp Unit".
2. Remove the Engine Block Case (Top) according to the section 2.5. "Removal of Engine Block Case (Top) / DMD Block".
3. Unscrew the 2 screws and remove the RL-Board bracket.
RL-P.C.Board
RL-Board bracket
XYN3+F8FJ
4. Unscrew the 2 screws (for each 1) and remove the Lamp Cable Socket (two places).
Lamp Cable Socket
XTW3+8PFJ
XYN3+F8FJ
5. 1) Unscrew the 1 screws and remove the Bimetal cover.
2) Unscrew the 2 screws and remove the Bimetal.
Bimetal cover
Bimetal
XYN3+F8FJK
XYN3+F8FJ
・Unscrew the 4 screws and remove the Analysis Block.
XYN4+J8FJ
Analysis Block
XYN4+F10FJK
DIS-8