Disassembly Instructions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Dis-4; Flowchart For Disassembly; Removal Of Lamp Unit; Removal Of Upper Case (R/Rm/Rl/M2/F/R2 -P.c.board) - Panasonic PT-DZ13KU Service Manual

2. Disassembly Instructions
2. 1. Flowchart for Disassembly
* Before Disassembly the projector, turn off the POWER switch and disconnect the power plug from the wall outlet.
* To assemble, reverse the disassembly procedures.
* When tore off sticky tapes, please use a new thing without reusing it on the occasion of assembling.
Completed Product
2. 2.

Removal of Lamp Unit

2. 3. Removal of Upper Case
2. 4.
2. 6.
2. 9.
(R/RM/RL/M2/F/R2-P.C.Board)
Removal of Intake
Duct (Assy)
Removal of Engine Block
2. 5.
Case (Top)/DMD Block
Removal of Rod(Assy)/
2. 7.
Iris Unit (Assy) / Relay Lens
Removal of Analysis/Synthesis
Block/Synthetic Mirror
Removal of
2. 8.
Analysis Mirror (Assy)
Removal of
2.13.
Lens Mount (Assy)
2.11. Removal of Ballast Block
Removal of Terminal Cover
Removal of
2.10.
Signal Processing Block
(B/Q-P.C.Board)
2.12.
(S-P.C.Board)
(A/G/WF/WL-P.C.Board)
DIS-4
Removal of
Power Supply Block
(P-P.C.Board)