Panasonic PT-DZ13KU Service Manual page 21

- LAMP1
- LAMP2
- P-UNIT
- BALLAST
- C-MIRROR
- DMD-EXST
- C-PRISM
- DMD1
- DMD2
6) Page 9
Information of SDI signal. (when information cannot show, "---" is displayed)
- MODE
- TRANSPORT
- PICTURE
- RATE
- SAMPLING
- BIT DEPTH
7) Page 10～11
ON-OFF log of lamp 1 and lamp 2
5. [TEST PATTERN] menu
The following test patterns are added.
- Focus (background 70% Gray) pattern
- Checker pattern
- Inverted checker pattern
Lamp1 fan status [Rotational speed]
Lamp2 fan status [Rotational speed]
Power fan status [Rotational speed]
Ballast fan status [Rotational speed]
Composition mirror fan status [Rotational speed]
DMD exhaust fan status [Rotational speed]
Color prism fan status [Rotational speed]
DMD1 fan status [Rotational speed]
DMD2 fan status [Rotational speed]
Mode ( NO SIGNAL , SD-SDI , HD-SDI , 3G-SDI )
Conversion method ( PROGRESSIVE , INTERLACED )
Picture information ( PROGRESSIVE , INTERLACED )
Rate information ( 23.98 , 24 , 25 , 29.97 , 30 , 50 , 59.94 , 60 )
Sampling information
( 4:2:2 (YPBPR) , 4:2:2 (YCBCR) , 4:4:4 (YPBPR) , 4:4:4 (YCBCR) ,
4:4:4 (RGB) , 4:4:4:4 (YPBPR+A) , 4:4:4:4 (RGB+A) , 4:4:4 (XYZ) )
Bit depth ( 8bit , 10bit , 12bit )