PT-L785U / PT-L785E
Note:
· Under this condition, the repair and the parts
replacement of the K-Module are possible.
8.9.
Removal of Analysis Block
1. Take the A-P.C.Board block out according to the steps 1
through 6 in the section 8.5. "Removal of A-P.C.Board".
2. Loosen the 2 screws until they idle and remove the lamp
unit.
3. Unscrew the 4 screws and remove the S-P.C.Board.
4. Unscrew the 2 screws and remove the ground fittings.
5. Unscrew the 1 screw and remove the bimetal holder.
6. Unscrew the 2 screws and remove the socket cover, then
remove the lamp unit terminal.
7. While
pressing the lens release button, fully turn
counterclockwise the lens and pull it out.
8. Unscrew the 3 screws and take the analysis and LCD
blocks out.
18