Advertisement
ICP DAS PMC-5141 User Manual
Log Mode
Set up the mode to be Average or Instantaneous when performing data
recording. When the Average mode is selected, the log data value is the
average value of the set of data acquired during the log rate interval. And
when the Instantaneous mode is selected, the log data value is the latest
value of the set of data acquired during the log rate interval).
Log File Retention Time
In this section you can set up the retention time of the log file. The files
exceed the retention time will be automatically removed. If an error is
occurred during the process of sending back the files, the retention time
will be automatically extended 10 more days. After the sending process
is back to normal, the retention time will be automatically adjusted to
original setting. The "Log File Retention Time" can be set as
10//20/30/60/90 days.
File Name Format
Set up the file name format for the data log file. The file name format
can be set as YYYY-MM-DD or DD-MM-YYYY formats。
(Y: Year，M: Month，D: Date)
End of Line Character
Set up End of Line Character. The character can be set according to the
system is using; it can be set as: CRLF(Windows), LF(Unix or Linux) or
CR(Mac) formats.
Daily Report Log Rate
Set up the time interval of the daily report. You can set the Log Rate as
10/15/20/30/60 minutes.
Event Logging
The Event Logging function allows to record the information about
significant system events. To enable "Event Logging", please click on the
check box in front and save the settings to enable the function. To disable
this function, uncheck and save the settings. When the Event Logging
function is disabled, it will still keep on recording the system events,
however, it will not perform any operation to upload or delete the files. The
settings of Event Logging are described as below:
http://www.icpdas.com
12
Advertisement
