Table of Contents
Advertisement
Other Features
Error Report (Turned on/off by a Serv-
ice Technician)
This report is printed after each
unsuccessful communication. The
communication failure report is
printed after a job has been com-
pleted. And at the end, it prints a
communication failure or trans-
mission result report. Check it, and
retransmit any pages that were not
sent. If a particular problem con-
tinues or gets worse, keep the error
reports for the service technician.
4
Report formats
* * * COMMUNICATION RESULT REPORT (JUL.24.2000
FILE MODE
<TX>
DATE
<RX>
DATE
The Mode Column
See the bottom of the Journal for a full listing of symbols on the Journal. On
other reports a code is given, informing the type of communication. These
codes are explained below.
The Result Column
OK: Successful communication
E: An error occurred
The Footnote on the Journal
TX counter: Total number of transmitted pages
RX counter: Total number of received pages
44
OPTION
ADDRESS (GROUP)
* * * JOURNAL(JUL.24.2000 11:07PM) * * *
TIME
ADDRESS
MODE
TIME
ADDRESS
MODE
Polling Result Report
This report is printed after your
machine polls a message from an-
other machine.
Printing Part of the Image on the Re-
port (Switch 04, bit 7)
For reference purposes, the machine
prints the first few inches of the fax
message on the following reports.
• Communication Result
• File Reserve
• Communication Failure Report
9:19PM) * * *
TTI XYZ COMPANY
RESULT
TTI XYZ COMPANY
TIME
PAGE
RESULT
TIME
PAGE
RESULT
PAGE
PERS.NAME
FILE
PERS.NAME
FILE
ZCWH150N
Advertisement
Table of Contents
