Report Formats - Ricoh H545 Operator's Manual

Other Features
communication failure report is
printed after a job has been com-
pleted. And at the end, it prints a
communication failure or trans-
mission result report. Check it, and
retransmit any pages that were not
sent. If a particular problem con-
tinues or gets worse, keep the error
reports for the service technician.
Polling Result Report
This report is printed after your
machine polls a message from an-
other machine.
4

Report formats

* * * COMMUNICATION RESULT REPORT (NOV.24.1998
FILE MODE
<TX>
DATE
<RX>
DATE
The Mode Column
See the bottom of the Journal for a full listing of symbols on the Journal. On
other reports a code is given, informing the type of communication. These
codes are explained below.
The Result Column
OK: Successful communication
E: An error occurred
42
OPTION ADDRESS (GROUP)
* * * JOURNAL(NOV.24.1998 11:07PM) * * *
TIME ADDRESS MODE
TIME ADDRESS MODE
Printing Part of the Image on the Re-
port (Switch 04, bit 7)
For reference purposes, the ma-
chine prints the first few inches of
the fax message on the following
reports.
• Communication Result
• File Reserve
• Communication Failure Report
9:19PM) * * *
TTI XYZ COMPANY
RESULT
TTI XYZ COMPANY
TIME PAGE RESULT
TIME PAGE RESULT
PAGE
PERS.NAME FILE
PERS.NAME FILE
GFLIST0N