Introduction - CDA PZ 10/2 User Operating Instructions Manual

Introduction

Congratulations on your purchase of this
and produced to give you many years of satisfactory use.
Before using this appliance it is essential that the following instructions are carefully read and
fully understood.
We would emphasise that the installation section must be fully complied with for your safety
to ensure that you obtain the maximum benefits from your appliance.
This cooker has been designed, constructed and marketed in compliance with:
- safety requirements of EEC Directive "Gas" 90/396;
- safety requirements of EEC Directive "Low voltage" 73/23;
- protection requirements of EEC Directive "EMC" 89/336;
- requirements of EEC Directive 93/68.
4
CDA cooker which has been carefully designed
B
A
Fig. 1
Assembling the
backguard
Remove the two spacers
"A" and the screw "B" from
the rear of the cooktop.
Assemble the backguard
as shown in figure 1 and fix
it by screwing the central
screw "B" and the spacers
"A".