Table of Contents
Advertisement
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton. The walking belt will begin to move at a low
speed. When the next segment of the workout
begins, the treadmill will automatically adjust to the
speed and incline settings for that segment.
4. Follow your progress with the display.
See step 5 on page 21.
5. Measure your heart rate if desired.
See step 6 on page 22.
6. When you are finished exercising, remove the
key from the console.
See step 7 on page 22.
HOW TO CONNECT YOUR TABLET TO THE
CONSOLE
The console supports BLUETOOTH connections
to tablets via the iFit–Smart Cardio Equipment app
and to compatible heart rate monitors. Note: Other
BLUETOOTH connections are not supported.
1. Download and install the iFit–Smart Cardio
Equipment app on your tablet.
On your iOS
or Android™ tablet, open the App
®
Store℠ or the Google Play™ store, search for the
free iFit–Smart Cardio Equipment app, and then
install the app on your tablet. Make sure that the
BLUETOOTH option is enabled on your tablet.
Then, open the iFit–Smart Cardio Equipment app
and follow the instructions to set up an iFit account
and customize settings.
2. Connect a heart rate monitor to the console if
desired.
If you are connecting both a heart rate monitor and
your tablet to the console, you must connect your
heart rate monitor before you connect your
tablet. See HOW TO CONNECT A HEART RATE
MONITOR TO THE CONSOLE on page 24.
3. Connect your tablet to the console.
Press the iFit Sync button on the console; the
console pairing number will appear in the display.
Then, follow the instructions in the iFit–Smart
Cardio Equipment app to connect your tablet to the
console.
When a connection is established, the LED on the
console will turn solid blue.
4. Record and track your workout information.
Follow the instructions in the iFit–Smart Cardio
Equipment app to record and track your workout
information.
23
Advertisement
Table of Contents
