Table of Contents
Advertisement
18. Firmly tighten the four 3/8" x 2 3/8" Screws (7),
the two 3/8" x 1 1/4" Screws (63), and the two
3/8" x 1 3/4" Screws (62).
Set the Left Inner Base Cover (99) onto the
lower end of the Left Upright (89). Then, slide
the Left Base Cover (82) downward and press it
onto the Left Inner Base Cover.
Next, set the Right Inner Base Cover (100) onto
the lower end of the Right Upright (90). Then,
slide the Right Base Cover (83) downward and
press it onto the Right Inner Base Cover.
19. IMPORTANT: You must activate your Console
(80) to begin using its exclusive features.
First, plug in the power cord (see page 19) and
turn on the power (see page 21).
Then, using your smart phone or tablet, go to
iFit.com/activate and follow the instructions to
activate the Console (80).
Note: If you do not have a smart phone or tablet,
use your computer to go to iFit.com/activate for
an alternate way to activate the Console (80). If
you do not have a computer, call Customer Care
(see the front cover of this manual).
20. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see page 30). Note: Extra parts may be included.
18
90
83
62
63
7
19
17
89
82
99
63
7
62
100
80
Advertisement
Table of Contents
