Table of Contents
Advertisement
A complete exhaust connection # 334615 C is available as an optional
item. Please mount the exhaust connection as follows:
1.
Disconnect the screwdriver from the air supply.
2.
Use motor housing to clamp the screwdriver spindle into a vice by
means of the chucking jaws 461500.
3.
Unscrew the quick release nipple and take off the seal ring and one
silencer.
4.
Assemble the extension 335666 with the supplied seal ring 801147 onto
the threaded fitting in the air inlet and tighten the extension.
5.
Mount the connection piece 335665 with the mounted parts onto the
extension 335666.
6.
Assemble the quick release nipple with the seal ring onto the extension
and tighten.
10 Storage
Unused machines should be stored in a dry, locked area.
33
Advertisement
Table of Contents
