Table of Contents
Advertisement
INFORMATION
Finder and bit are not included in the delivery capacity of the
spring sleeve.
You will find suitable inserting tools
·
·
Mount the exhaust connection 386924 G (in the screwdriver axis) resp.
386924 H (right-angled to the screwdriver axis) as follows:
1.
Disconnect screwdriver from air supply.
2.
Clamp screwdriver spindle always with chucking jaws into a vice, utilizing
the flats of the motor housing (otherwise motor- and gearing parts may
be damaged).
3.
Unscrew the double nipple 829214 together with the air connection parts.
4.
Take off snap ring 800964 (from air connection 386924 F) and remove
the silencers.
5.
Screw off sleeve 401119 (AF 19, from air connection 386924 F) from
valve housing.
6.
Mount the sleeve 4011191 and assemble the o-ring 802483 as well as
the silencers 399460.
7.
Install exhaust hose to connection piece as needed and tighten exhaust
connection 386924 G/H with the circlip 800295.
à Spare Parts Drawing 386924 G/H – see Spare Parts Drawings for
Accessories
10 Storage
Unused machines should be stored in a dry, locked area.
in our brochure D 3320 E or
on the internet as follows:
Technology® Selection program: Inserting tools
www.deprag.de
34
® Screwdriving
Advertisement
Table of Contents
