superbrightleds FLCKM2 Series User Manual

Important: Read all instructions prior to installation.
Knuckle-Mount LED Flood Light Fixture

Safety and Notes

• Product should be installed and serviced in accordance with
applicable national, state, and local building and electrical codes.
• To reduce the risk of electric shock, ensure that the main power
source and circuit breakers are switched off before performing
any installation or wiring procedures.
• Avoid looking directly into lamp when illuminated.
• Ensure all mounts are securely attached and will support the
weight of the fixture. Failure to properly support fixture may result
in damage or injury, for which the manufacturer does not
assume responsibility.

Specifications

Specifications
Operating Temperature
Environmental Rating
Check product label for specific electrical
specifications related to installation.
Improper installation will void warranty.

CCT / Wattage / Photocell Settings

Use a screwdriver to remove plug.
Make desired CCT, wattage (60 W only),
and photocell adjustments.
FLCKM2
-40°–113° F (-40°–45° C)
IP65
Wattage Selection
(60 W only)
40W 50W 60W
Rev Date: V1 09/28/2022
4400 Earth City Expy, St. Louis, MO 63045
User Manual
FLCKM2 Series
FLCKM2-SW3B30-BRK

Wiring Diagram

120–277 VAC Input
Line
Line
Neutral
Neutral
Ground
Ground
0–10 V Dimming
Dim (+)
Dim (+)
Dim (-)
Dim (-)
CCT Selection
3K 4K 5K
ON
SENSOR
Photocell On/Off
866-590-3533
Black
Black
L L
L L
White
White
N N
N N
Green
Green
GND GND
GND GND
Purple
Purple
+ +
+ +
Gray/Pink
Gray/Pink
- -
- -
OFF
superbrightleds.com