superbrightleds FUT Series User Manual

Important: Read all instructions prior to installation.
RGB+CCT Bulbs

Specifications

Model FUT104
bulb type MR16
(GU5.3)
operating voltage 12 VAC/VDC
power consumption
dimming through controller only (saturation)

Safety and Notes

• For indoor use only
• White color temperature can not be adjusted unless white
LED selection mode is active.

Compatible Remote Controls

One of these controls (available at additional cost) is required
to control the bulb. Each light can be linked with up to 4 different
remote controls (any combination of wireless remotes and Wi-Fi
controls). Each control (and zone) can be linked to an unlimited
number of lights.
WIFI-CON2
(for smart phone control)
FUT103 FUT012
MR16 A19
(GU10) (E26/E27 base)
100–240 VAC
4 W 9 W
RGBCCT-MZ8-RF
3 2
5
4
9
1 1
7 7
6
8 8
FUT104

Control Features

1. Master On/Off
Acts as a master On (-)/Off (O) control for all linked RGBW and RGB+CCT lights. Also
activates the Master function, which allows remote to control lights of all zones. If a zone
is currently active, pressing Master On (-) button on remote or back button in app restores
Master function to the remote.
2. Color Selection Ring
Directly selects color along a circular spectrum. Press W button to changes to a
steady bright white.
3. Selection LED Indicator (wireless remote control only)
Flashes once to indicate when a command has been selected.
4. Brightness Touch Slider - Increase/Decrease
Increases (right side) or decreases (left side) the brightness level. Changing active mode
resets brightness level to full.
5. Saturation/CCT Touch Slider - Increase/Decrease
Increases (right side) or decreases (left side) the color saturation level. When controlling
white, adjusts from cool white (right side) to warm white (left side).
6. Mode
Nine distinct modes feature different color combinations, light transitions, and patterns.
On wireless remote, this button initiates mode function and scrolls through modes in
ascending order. In app, simply select mode button and press any numbered mode
button to switch between modes.
7. Mode Speed Increase/Decrease
Increases (S+ or +Speed) or decreases (S- or -Speed) speed of currently active mode.
8. Zones 1–8 On (|)/Off (O)
Allows up to eight zones (channels) of RGBW and/or RCB+CCT lights to be separately
linked and controlled by remote/app. Pressing any Zone On(|) button activates that zone.
Commands will affect only lights in that zone. Once linked to a zone, lights remain linked until
they are unlinked.
9. White LED Selection
Switches to white LED operation.
Note: While functions remain the same, the phone/tablet display will vary in appearance from remote control.

Light Modes

Mode Description
1 seven color, gradual transition
2 white (mix of warm and cool), gradual transition
3 RGB, gradual transition
4 seven color sequence, jump to change
5 random color, jump to change
6 red light pulse then flash 3 times
7 green light pulse then flash 3 times
8 blue light pulse then flash 3 times
9 white (mix of warm and cool) light pulse then flash 3 times
Rev. V3 Date: 02/08/21
4400 Earth City Expy, St. Louis, MO 63045
User Manual
FUTxxx Series
FUT103
FUT012
Additional Control(s)
saturation, speed, and brightness
speed and brightness
saturation, speed, and brightness
saturation, speed, and brightness
saturation, speed, and brightness
saturation, speed, and brightness
saturation, speed, and brightness
saturation, speed, and brightness
speed and brightness
866-590-3533 superbrightleds.com