Table of Contents
Advertisement
7
1.888.610.7664
Handling the camera
• Switch Auto <> Manual temperature scale: Switch between automatic or manual im-
age adjustment mode. For more information, see section 11.3 Adjusting the infrared
image.
• Autofocus
4
: One-shot autofocus of the infrared camera.
• Continuous autofocus
4
functions.
• Hide image overlay graphics: Switch between hide/show all overlay graphics and im-
age overlay information. For more information, see section 11.8 Hiding all overlay.
• Calibrate: Perform a manual NUC. For more information, see section 11.7 Performing
a non-uniformity correction (NUC).
• Auto-adjust the manual temperature scale: Perform an automatic adjustment of the
image while remaining in manual image adjustment mode.
• Switch Thermal <> Digital camera: Switch between the image modes Thermal and
Digital camera. For more information, see section 12 Working with image modes.
• Switch Thermal <> Thermal MSX: Switch between the image modes Thermal and
Thermal MSX. For more information, see section 12 Working with image modes.
• Switch 1x zoom <> Max zoom: Switch between the digital zoom factor of 1× and max-
imum zoom.
• Switch camera flash On <> Off: Switch between the enabled/disabled camera flash
functions. For more information, see section 7.10 Using the camera lamp as a flash.
Note The flash function will not be activated if the setting Lamp & laser is set to the
option Disable all. For more information, see section 23.6 Device settings.
• Switch single shot <> Video: Switch between the recording modes Single shot and
Video.
• Switch between two latest palettes: Switch between the two last-used color palettes.
For more information, see section 11.5 Changing the color palettes.
• Switch temperature range: Cycle through the camera temperature ranges. For more
information, see section 23.4 Camera temperature range.
• Switch screen rotation On <> Off: Switch between enabled/disabled screen rotation.
• Save: Save an image.
• Save + Prompt for note: Save an image and display the note annotation tool.
• Save + Prompt for table: Save an image and display the table annotation tool.
• Save + Prompt for voice annotation: Save an image and display the voice annotation
tool.
• Save + Prompt for sketch: Save an image and display the sketch annotation tool.
• Save + Select annotation from menu: Save an image and display the annotation tool
menu.
• Preview: Display a preview image.
• Preview + Prompt for note: Display a preview image and the note annotation tool.
• Preview + Prompt for table: Display a preview image and the table annotation tool.
• Preview + Prompt for voice annotation: Display a preview image and the voice annota-
tion tool.
• Preview + Prompt for sketch: Display a preview image and the sketch annotation tool.
• Preview + Select annotation from menu: Display a preview image and the annotation
tool menu.
7.10 Using the camera lamp as a flash
The camera lamp can be used as a flash for the digital camera. When the flash function
is enabled, the camera lamp will flash when an image is saved by pulling the trigger.
You can also turn on the camera lamp to use it as a flashlight.
Follow this procedure:
1. Push the navigation pad to display the menu system.
4. This item is dependent on the camera model.
www.calcert.com
15
10
20
5
25
0
30
#T810587; r. AD/90967/90989; en-US
: Switch between the enabled/disabled continuous autofocus
sales@calcert.com
37
Advertisement
Table of Contents
