Table of Contents
Advertisement
3. The display changes to show the Preset Amount.
The UP or DOWN ARROWS can be used to
increase or decrease this amount. If you change
the amount you must press the center ENTER
button on the meter's keypad to confirm the new
amount before you begin dispensing fluid.
MOBIL1 5W-20
0.00
F
. 33
IG
4. Pull the trigger to begin the dispense. The meter
counts up from 0. The progression bar also provides
a visual display of the dispense.
NOTE: If at any time before reaching the preset dis-
pense amount, you want to stop the dispense, STOP on
the bottom of the screen can be selected.
MOBIL1 5W-20
2.25
xxxxxxxxxxxxxxxxxxxxxxxx
STOP
F
. 34
IG
The screen shown in F
IG
RIGHT ARROW and center ENTER s to select one of
three options:
a. TOP OFF - the dispense can be continued in
TOP OFF mode (see description of TOP OFF,
on this page.
313046A
QTS
20.0
20.0
QTS
4.5
. 35 displays. Use the LEFT or
b. PRESET - returns meter to PRESET mode and
continues the current preset dispense where it
was stopped.
c. END - ends the dispense and sends final report
to PC.
STOPPED
4.50
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
TOP OFF
F
. 35
IG
5. When the preset amount has been dispensed the
meter will click loudly and release the trigger, stop-
ping the dispense.
6. You now have the option to choose either:
•
TOP OFF if you need to add additional fluid.
The amount of top off allowed can be limited
during meter programming.
OR . . .
•
END to finish the dispense and send the dis-
pense report to the PC.
TOP OFF
4.50
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
TOP OFF
F
. 36
IG
Dispense
QTS
PRESET
END
DONE
QTS
END
21
Advertisement
Table of Contents
