Graco 256282 Instructions Manual page 18

Table of Contents

Advertisement

Setup
To Display PC Created Work Order on the
Meter:
The screen shown in F
IG
Work Orders and Job Numbers from the PC only) or (b)
(meter set to receive Work Orders and Job Numbers
from the PC or created at the meter), displays before a
dispense can be made by the meter.
To view the Work Orders in the Work Order Queue:
1. Use the UP or DOWN ARROWS to display the work
orders.
2. When the work order that applies to the vehicle you
are servicing appears on the display, press the
ENTER button to start a dispense.
(a)
MOBIL1 5W-20
SELECT
ti12257a
MOBIL1 5W-20
(b)
SELECT
ti12270
F
. 27
IG
18
. 27 (a) (meters set to receive
ENTER NEW
Creating Work Order at the Meter (F
Using the UP ARROW displays the numbers, 0 - 9 and
then alphabet letters, A - Z. By using the DOWN
ARROW when the blank field is displays will also
provide the period (.) ; forward slash (/); dash (-)
characters; or space can be used.
To enter a new work order at the meter:
1. Use the LEFT ARROW to position the cursor over
ENTER NEW.
2. Press center ENTER button on the meter's keypad
to select the ENTER NEW option.
3. The cursor automatically is positioned on the first
field of the Enter Work Order screen. Use the UP or
DOWN ARROWS to scroll through the list of num-
bers, letters and characters or a field can be left
blank.
ENTER W.O
1
2
3
W
E
B
CANCEL
F
. 28
IG
4. When the number, letter or character you want to
use displays, press the center ENTER button on
meter's keypad to confirm the selection. The cursor
automatically advances to the next field.
5. Repeat this procedure for all Work Order and Job
Number fields on the display.
After the last field has been completed, the cursor
will automatically move to the CANCEL.
6. To Cancel the new Work Order and Job Number
you just created on the meter, press the center
ENTER button on meter's keypad to select the Can-
cel option.
To Select the new Work Order and Job Number you
just created on the meter, use the LEFT ARROW to
move the cursor to ENTER on the display. Press the
. 28)
IG
4
5
6
7
8
ENTER
313046A

Advertisement

Table of Contents
loading

Table of Contents