Graco 256282 Instructions Manual page 10

Emergency
2. The Emergency Screen appears. The cursor is
already in position for entering the first number of
the Emergency Code. Use the UP or DOWN
ARROWS to scroll through the numbers 0-9 until the
first number of the unique Emergency Code
assigned to that meter appears in the field.
EMERGENCY MODE
2 1 2 2
ENTER
F . 12
IG
3. Use the center ENTER to confirm the selection. The
cursor moves to the next field.
4. Repeat steps 2-3 until all 4 numbers have been
entered. After the 4th number of the Emergency
Code is entered the cursor automatically moves to
the ENTER on the display.
5. Press the center ENTER button to confirm the
selection.
6. The Dispense Screen displays on the meter.
NOTE: When the meter is put in Emergency Mode:
• All pending work orders will be deleted from the
work order queue in the meter. They will have to be
entered again by the System Administrator on the
PC.
• New work orders cannot be added at the meter.
10
QUIT
313046A