Wireless Speaker - Power Connection; In-Line Fuse And Thermal Breaker Ratings; Loud Hailer Connection (Ray73 Only) - Raymarine RAY63 Installation And Operation Instruction Manual

8.15 Wireless speaker – power connection
The wireless speaker is an active speaker that requires a 12 V dc power supply. The power cables
should be connected via a distribution panel or, if required directly to a battery.
Refer to the Power distribution

In-line fuse and thermal breaker ratings

The wireless speaker is internally fused, however it is recommended that you fit an inline fuse on the
positive wire of your product's power cable or connect using a thermal breaker.
In-line fuse rating
2 A
Note:
• The suitable fuse rating for the thermal breaker is dependent on the number of devices you are
connecting. If in doubt consult an authorized Raymarine

8.16 Loud hailer connection (Ray73 only)

A Loud hailer (M95435) can be connected to the radio using the loud hailer wires.
90
section for guidance on connecting to a power supply.
Thermal breaker rating
2 A (refer to note below)
dealer.
®