4.13 Wireless speaker – power connection
The wireless speaker is an active speaker that requires a 12 V dc power supply. The power cables
should be connected via a distribution panel or, if required directly to a battery.
Refer to the
Power distribution
In-line fuse and thermal breaker ratings
The wireless handset charging holster is internally fused, however it is recommended that you fit an
inline fuse on the positive wire of your product's power cable or connect using a thermal breaker.
In-line fuse rating
1.25 A
Note:
• The suitable fuse rating for the thermal breaker is dependent on the number of devices you are
connecting. If in doubt consult an authorized Raymarine
64
section for guidance on connecting to a power supply.
Thermal breaker rating
1.25 A (refer to note below)
®
dealer.