Selecting A Language; Switching On The Ais Receiver; Selecting A Network Type - Raymarine RAY63 Installation And Operation Instruction Manual

9.12 Selecting a language

The language the radio uses can be changed.
From the Main menu:
1. Select Set-up.
2. Select Language.
The languages available are:
English (default) (default) — English
• English English (default)
• Español Español — Spanish Español
• Français Français — French Français
Deutsch — German
• Deutsch Deutsch
• Italiano Italiano — Italian Italiano
3. Select the language that you want the radio to be set to.
The User interface language is changed to the selected language.

9.13 Switching on the AIS receiver

If your radio includes a built-in AIS receiver then it can be enabled and disabled as follows:
From the Main menu:
1. Select Set-up.
2. Select AIS.
3. Select On to switch the receiver on, or select Off to switch the receiver off.

9.14 Selecting a network type

When connecting your radio to other devices it is important to ensure you select the network
connection and type that you want data to be transmitted over.
From the Main menu:
1. Select Set-up.
2. Select Network output.
The following network types are available:
• NMEA 2000 (default)
• 0183 High speed
• 0183 Std speed
3. Select the network type relevant to the devices connected to your radio. If your radio is not
connected to any other devices any option can be selected.
Selecting 0183 0183 Std 0183 Std speed Std
The Network output setting determines the baud rate of the NMEA 0183 input:
Network output setting
NMEA 2000
NMEA 0183 High Speed
NMEA 0183 Standard Speed
Getting started
speed will disable the built-in AIS receiver, where applicable. speed
NMEA 0183 input baud rate
Standard speed (4,800)
High speed (38,400)
Standard speed (4,800)
107