Enabling Shared Brightness - Raymarine RAY63 Installation And Operation Instruction Manual

Any adjustments to the shared brightness level will be applied to all products assigned to the same
group.
LightHouse™ / LightHouse™ 2 MFD
VHF DSC Radio
Multiple brightness groups can be configured. For example, these groups could be used to reflect
the physical location of products on your vessel e.g.: helm and flybridge.
Shared brightness requires:
• all products to be compatible with the shared brightness function (see list of compatible products
above).
• the Shared brightness setting set to On for all products in the brightness group.
• products to be assigned to network groups.
• all the products in each group to be synchronized.

Enabling Shared Brightness

From the Display Set-up menu: (Menu > Set-up > Display Set-up).
1. Select Shared Brightness.
2. Select Shared Brightness again to enable Shared Brightness.
If Shared Brightness is already enabled then selecting this menu item will disable Shared
Brightness.
3. Select Group.
4. Select the group that you want to assign the radio to.
Adjusting the Brightness setting will now change the brightness of all products assigned to that group.
Getting started
Instrument display / Pilot controller
LightHouse™ 3 V3.4 or greater
105