Shared Brightness; Enabling Shared Brightness - Raymarine RAY90 Installation And Operation Instruction Manual

5.6 Shared Brightness

You can set up Shared Brightness groups which enables simultaneous brightness adjustment of all
units that are part of the same group.
The following products are compatible with Shared Brightness:
• LightHouse™ 3 MFDs using software version 3.4 or greater.
• LightHouse™ or LightHouse™ 2 powered MFDs.
• SeaTalkng ® Instrument displays and Pilot controllers.
• SeaTalkng ® VHF DSC Radios.
Any adjustments to the Shared Brightness level will be reflected on all units assigned to the same
group.
LightHouse™ / LightHouse™ 2 MFD Instrument display / Pilot controller
VHF DSC Radio LightHouse™ 3 V3.4
Multiple brightness groups can be configured. These groups could be used to reflect the physical
location of units on your vessel. For example, the units at your helm can be set to one group, and the
units on the flybridge can be set to a different group.
Shared Brightness requires:
• all units to be compatible with the Shared Brightness function (see list of compatible units above).
• the Shared brightness setting set to On for all units in the brightness group.
• units to be assigned to Network Groups.
• all the displays in that group to be synchronized.

Enabling Shared Brightness

From the Display Set-up menu: (Menu > Set-up > Display Set-up).
1. Select Shared Brightness.
2. Select Shared Brightness again to enable Shared Brightness.
78