Advisories And Warnings For Connecting To The Internet; Protecting Your Personal Information; Notes On The Administrator Password; Initial Administrator Password - Epson ES-C380W User Manual

Important Instructions
❏ The exterior cover of the touchscreen could break if it receives a heavy impact. Contact your dealer if the panel
surface chips or cracks, and do not touch or attempt to remove the broken pieces.
❏ Press the touchscreen gently with your finger. Do not press force or operate with your nails.
❏ Do not use sharp objects such as ball point pens or sharp pencils to perform operations.
❏ Condensation inside the touchscreen due to abrupt changes in temperature or humidity may cause
performance to deteriorate.
Advisories and Warnings for Connecting to the
Internet
Do not connect this product to the Internet directly. Connect it in a network protected by a router or firewall.

Protecting Your Personal Information

When you give the scanner to someone else or dispose of it, erase all the personal information stored in the
scanner's memory by selecting the menus on the control panel as described below.
Settings > System Administration > Restore Default Settings > All Settings

Notes on the Administrator Password

This device allows you to set an administrator password to prevent unauthorized third parties from accessing or
changing the device settings or the network settings stored in the device when it is connected to a network.
If you set an administrator password, you need to enter the password when changing settings in configuration
software such as Web Config.
The initial administrator password is set on the scanner, but you can change it to any password.

Initial Administrator Password

The initial administrator password varies depending on the label attached to the product. If there is a
"PASSWORD" label attached to the back, enter the 8-digit number shown on the label. If there is no "PASSWORD"
label attached, enter the serial number on the label attached to the base of the product for the initial administrator
password.
We recommend changing the initial administrator password from the default setting.
Note:
No user name is set as default.

Operations that Require the Administrator Password

If you are prompted to enter the administrator password during the following operations, enter the administrator
password set on the product.
❏ When logging on to the advanced settings for Web Config
>

Notes on the Administrator Password

13
>
Operations that Require the Administrator P
...