Connecting To A Smart Device Using Wi-Fi Direct; Disconnecting Wi-Fi Direct (Simple Ap) Connection; Changing The Wi-Fi Direct (Simple Ap) Settings Such As The Ssid - Epson ES-C380W User Manual

Adding or Replacing the Computer or Devices

Connecting to a Smart Device using Wi-Fi Direct

This method allows you to connect the scanner directly to smart devices without a wireless router.
1. Select on the home screen.
2. Select Wi-Fi Direct.
3. Select Start Setup.
4. Start Epson Smart Panel on your smart device.
5. Follow the instructions displayed on the Epson Smart Panel to connect to your scanner.
When your smart device is connected to the scanner, go to the next step.
6. On the scanner's control panel, select Complete.

Disconnecting Wi-Fi Direct (Simple AP) Connection

There are two methods available to disable a Wi-Fi Direct (Simple AP) connection; you can disable all connections
by using the control panel, or disable each connection from the computer or the smart device.
When you want to disable all connections, select
Direct.
Important:
c
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the scanner in
Wi-Fi Direct (Simple AP) connection are disconnected.
Note:
If you want to disconnect a specific device, disconnect from the device itself instead of the product. Use one of the following
methods to disconnect the Wi-Fi Direct (Simple AP) connection from the device.
❏ Disconnect the Wi-Fi connection to the scanner's network name (SSID).
❏ Connect to another network name (SSID).

Changing the Wi-Fi Direct (Simple AP) Settings Such as the SSID

When Wi-Fi Direct (simple AP) connection is enabled, you can change the settings from
Direct > Start Setup >
Change Network Name
Change the Wi-Fi Direct (simple AP) network name (SSID) used for connecting to the scanner to your arbitrary
name. You can set the network name (SSID) in ASCII characters that is displayed on the software keyboard on the
control panel. You can enter up to 22 characters.
, and then the following menu items are displayed.
>
Connecting a Smart Device and Scanner Directly (
> Wi-Fi Direct > Start Setup >
229
...
Disable Wi-Fi
> Wi-Fi