Epson ES-C380W User Manual page 268

Administrator Information
Setting of Remote IPv4*1
Address(Host)
IPv6*1*2
Blank
*1If IPsec is selected for Access Control, you cannot specify in a prefix length.
*2If IPsec is selected for Access Control, you can select a link-local address (fe80::) but group policy will be disabled.
*3Except IPv6 link local addresses.
Related Information
"How to Run Web Config in a Web Browser" on page 36
&
References of Service Name on Group Policy
Note:
Unavailable services are displayed but cannot be selected.
Service Name Protocol type
Any –
ENPC UDP
SNMP UDP
WSD TCP
WS-Discovery UDP
Network Scan TCP
Network Push UDP
Scan Discovery
Network Push TCP
Scan
HTTP (Local) TCP
HTTPS (Local) TCP
HTTP (Remote) TCP
HTTPS (Remote) TCP
>
Advanced Security Settings
✓
–
✓
Local port Remote port
number
– –
3289 Any port
161 Any port
Any port 5357
3702 Any port
1865 Any port
2968 Any port
Any port 2968
80 Any port
443 Any port
Any port 80
Any port 443
268
>
Encrypted Communication Using IPsec/IP Filtering
–
✓
✓
Features controlled
number
All services
Searching for a scanner from
applications such as Epson Device
Admin and the a scanner driver
Acquiring and configuring of MIB from
applications such as Epson Device
Admin and the Epson scanner driver
Controlling WSD
Searching for a scanner from WSD
Forwarding scan data from Epson
ScanSmart
Searching for a computer from scanner
Acquiring job information of push
scanning from Epson ScanSmart
HTTP(S) server (forwarding data of
Web Config and WSD)
HTTP(S) client (firmware updating and
root certificate updating)
✓
✓
✓