Maintenance
>
Cleaning Inside the Scanner
Cleaning Outside the Scanner
Wipe off any stains on the outer case with a dry cloth or a cloth dampened with mild detergent and water.
Important:
c
❏ Never use alcohol, thinner, or any corrosive solvent to clean the scanner. Deformation or discoloration may occur.
❏ Do not let water get inside the product. This could cause a malfunction to occur.
❏ Never open the scanner case.
P
1. Press the
button to turn off the scanner.
2. Unplug the AC adapter from the scanner.
3. Clean the outer case with a cloth dampened with mild detergent and water.
Note:
Wipe the touchscreen by using a soft, dry cloth.
Cleaning Inside the Scanner
After using the scanner for a while, paper and room dust on the roller or the glass part inside the scanner may
cause paper feed or scanned image quality problems. Clean the inside of the scanner every 5,000 scans.
You can check the latest number of scans on the control panel or in the Epson Scan 2 Utility.
If a surface is stained with a hard-to-remove material, use a genuine Epson cleaning kit to remove stains. Use a
small amount of cleaner on the cleaning cloth to remove the stains.
Caution:
!
Be careful not to get your hands or hair caught in the gears or rollers when cleaning the inside the scanner. This
could cause an injury.
Important:
c
❏ Never use alcohol, thinner, or any corrosive solvent to clean the scanner. Doing so could cause deformation or
discoloration to occur.
❏ Never spray any liquid or lubricant on the scanner. Damage to equipment or circuits may cause abnormal
operations.
❏ Never open the scanner case.
Note:
❏ You can set cleaning time notifications and alerts after making a certain number of scans on the control panel or in the
Epson Scan 2 Utility. By default, a notification is sent after every 5,000 scans.
❏ Clean inside the scanner while it is turned on.
174