Connecting The Product To The Network - Epson B11B259201 User Manual

1 Epson scanner
2 Ethernet cable
3 Ethernet hub/switch
4 Computers with a wired network interfaces
5 Router
6 Internet
Parent topic:

Connecting the Product to the Network

To install your product on a network, follow the instructions on the Start Here sheet and install the
necessary software by downloading it from the Epson website. The installer program guides you through
network setup. You can check the network status using your product's control panel.
1. Press the
2. Use the arrow buttons to select Settings and press OK.
3. Use the arrow buttons to select Network Status and press OK.
Wired Networking
home button, if necessary.
57