Adjusting The Amount Of Froth; Making Cappuccino And Milk Based; Cleaning The Milk Container After Use - DeLonghi PrimaDonna Elite ECAM65 55 Series Instructions For Use Manual

10.2

Adjusting the amount of froth

Turn the froth adjustment dial (D1) to adjust the amount of froth
on the milk delivered while making cappuccinos and milk-based
coffees.
Dial Description Recommended for...
position
NO FROTH HOT MILK (NOT FROTHED) /
CAFFELATTE
MIN. FROTH LATTE MACCHIATO /
FLAT WHITE
MAX. FROTH CAPPUCCINO / CAPPUCCI-
NO+ / CAPPUCCINO MIX /
ESPRESSO MACCHIATO / HOT
MILK (FROTHED)
10.3

Making cappuccino and milk based

coffees automatically
1. Fill the milk container (D) and attach it as described above.
2. Select the required beverage:
Directly selected beverages:
• CAPPUCCINO (B10)
• LATTE MACCHIATO (B11)
• CAFFELATTE (B12)
• HOT MILK (B13)
Selectable from the beverage selection menu (B3):
• CAPPUCCINO+
• ESPRESSO MACCHIATO
• FLAT WHITE
• CAPPUCCINO MIX
3. A message on the display (B1) instructs you to turn the
froth adjustment dial (D1) according to the froth required
by the original recipe. Turn the dial on the milk container
lid (D2) and confirm the selection by pressing the selection
arrow corresponding to "OK ".
4. After a few seconds, preparation begins automatically and
an image of the selected beverage appears on the display,
together with a progress bar which gradually fills as prepa-
ration progresses.
Please note: general indications when preparing all
milk-based beverages
• To interrupt preparation and go back to the main screen,
press the selection arrow corresponding to "STOP".
• As soon as delivery has ended (within 3 seconds), to in-
crease the quantity of milk or coffee in the cup, just press
one of the beverage selection symbols.
• Preparation of each coffee can be customised (see sections
and ).
• Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
Once the coffee has been made, the appliance is ready to make
the next beverage.

10.4 Cleaning the milk container after use

Important! Danger of burns
When cleaning the internal tubes of the milk container, a little
hot water and steam leak out of the frothed milk spout (D5).
Avoid contact with splashes of water.
Each time you use a milk function, "TURN DIAL TO CLEAN POSI-
TION" appears on the display and the milk frother lid must be
cleaned:
1. Leave the milk container (D) in the machine (you do not
need to empty it);
2. Place a cup or other recipient under the frothed milk spout
(fig. 21);
3. Turn the froth adjustment dial (D1) to "CLEAN" (fig. 20).
"CLEANING UNDERWAY RECIPIENT UNDER SPOUT" appears
on the display (B1) together with a bar which gradually
fills as cleaning progresses. Cleaning stops automatically;
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the steam
connection nozzle (A9) with a sponge (fig. 22).
Please note!
• To prepare a number of cappuccinos or milk-based coffees,
clean the milk container after you have prepared the last
beverage only. To proceed with making the next beverag-
es, press " ESC".
• If you do not clean the milk container, the
bol appears on the display to remind you that it needs
cleaning.
• The milk container can be kept in the refrigerator.
• In some cases, before cleaning you must wait for the appli-
ance to heat up.
16
11.
Do no
delive
1.
r
2.
a
3. P
s
4. P
"
5.
T
t
r
6.
d
e
"
•
f
•
"
p
12.
sym-
Do no
delive
1.
r
2.
i
3. P
s
4. P
"
5.
c
e
p
i