DeLonghi PrimaDonna Elite ECAM65 55 Series Instructions For Use Manual page 27

INSERT MILK CONTAINER The milk container (D) is not inserted correctly. Insert the milk container as far as it will go (fig.
INSERT INFUSER ASSEMBLY The infuser (A19) has not been replaced after
cleaning.
PUSH
WATER CIRCUIT EMPTY The water circuit is empty
PRESS OK TO START
OK
PRESS OK TO CLEAN OR TURN The milk container has been inserted with
DIAL the froth adjustment dial (D1) in the "CLEAN"
position.
OK
TURN DIAL TO CLEAN POSITION Milk has been delivered recently and the tubes
inside the milk container (D) must be cleaned.
CLEAN
ESC
18).
Insert the infuser as described in section "15.9
Cleaning the infuser".
Press "OK " to deliver water from the spout
(C6) until it flows out normally.
If the problem persists, make sure the water
tank (A16) is fully inserted.
To proceed with the CLEAN function press "OK
", or turn the froth adjustment dial to one of
the milk positions.
Turn the froth adjustment dial (D1) to CLEAN
(fig. 20).
26
TUR
ADJ
DES
OK T
REP
TER
GEN
USE