Statistics; Making Coffee; Selecting The Coffee Aroma; Selecting The Coffee Quantity - DeLonghi PrimaDonna Elite ECAM65 55 Series Instructions For Use Manual

Hide thumbs Also See for PrimaDonna Elite ECAM65 55 Series:
Table of Contents

Advertisement

8.18 Statistics

This displays statistics relating to the machine.
To display the statistics, proceed as follows:
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until "
appears on the display;
3. Press the selection arrow corresponding to "
TICS
" and check all the statistics by scrolling through the
items using the selection arrow corresponding to "NEXT>";
4. Press "
ESC" twice to go back to the homepage.
9.

MAKING COFFEE

9.1 Selecting the coffee aroma

Select the required coffee aroma by pressing the selection arrow
(B2) corresponding to "AROMA" (B5):
(see "9.6 Making coffee
using ground coffee")
X-LIGHT
LIGHT
MEDIUM
STRONG
X-STRONG
Custom (if programmed) /
Standard

9.2 Selecting the coffee quantity

Select the required quantity by pressing the selection arrow (B2)
corresponding to "QUANTITY" (B9):
SMALL SIZE
MEDIUM SIZE
LARGE SIZE
EXTRA LARGE SIZE
Custom quantity (if pro-
grammed)
quantity

9.3 Adjusting the coffee mill

The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
However, if after making the first few coffees you find that the
"
coffee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (A5 - fig. 10).
STATISTICS"
Please note!
The grinding adjustment dial must only be turned when the
STATIS-
coffee mill is in operation.
a drop at a time).
These adjustments will only be evident after at least 2 cups of
coffee have been delivered.
If this adjustment does not obtain the desired result, turn the
dial another click.

9.4 Tips for a hotter coffee

For hotter coffee, you should:
perform a rinse cycle by selecting the "Rinsing" function in
the settings menu (section "8.1 Rinsing
warm the cups with hot water using the hot water function
(see section "11. Delivering hot water");
increase the coffee temperature in the settings menu (see
section "8.10 Coffee temperature

9.5 Making coffee using coffee beans

Important!
Do not use caramelised or candied coffee beans as they could
stick to the coffee mill and make it unusable.
1. Fill the container (A3) (fig. 11) with coffee beans;
2. Place a cup under the coffee spouts (A8);
3. Lower the spouts as near as possible to the cup (fig. 12).
This makes a creamier coffee;
4. Then select your required coffee:
- ESPRESSO (B14)
- COFFEE (B15)
- LONG (B16)
- DOPPIO+ (B17);
6. Preparation begins. An image of the selected beverage
appears on the display (B1) together with a progress bar
/
Standard
which gradually fills as preparation progresses.
Please note:
14
If the coffee is delivered too slowly or not
at all, turn one click clockwise towards 7.
For fuller bodied creamier coffee, turn
one click anticlockwise towards 1 (do
not turn more than one click at a time
otherwise the coffee could be delivered
");
").
t
a
o
m
t
c
c
i
p
Once
the n
t
e
m
c
j
"
p
9.6
c
i
t
If you
at a ti
1.
(
2.
3.
l
4.
(
5.
-

Advertisement

Table of Contents
loading

Table of Contents