DeLonghi PrimaDonna Elite ECAM65 55 Series Instructions For Use Manual page 22

36
nning
d with
A
ERT"),
on
e (A9)
s (fig.
n the
caling
manu-
with a minimum capacity of 2 litres under the hot water/steam
spout (C6) and coffee spouts (A8) (fig. 8);
Important! Danger of burns
OK TO
Hot water containing acid flows from the hot water/steam and
o des-
coffee spouts. Take care to avoid contact with splashes of this
w the
solution.
7. Press "OK " to confirm that you have added the descaling
mbol
solution. "DESCALING UNDERWAY" appears on the display
needs
(B1). The descale programme starts and the descaler liquid
comes out of the cappuccino maker and coffee spouts. A
series of rinses and pauses is performed automatically to
"
remove all the scale residues inside the coffee machine;
After about 25 minutes, descaling stops;
";
8. "RINSE AND FILL WATER TANK UP TO MAX LEVEL" (fig. 5):
the appliance is now ready to rinse with fresh water. Empty
3. "REMOVE WATER SOF-
TENER FILTER" (fig. 37);
extract the water tank
(A16), remove the water
softener filter (C4) (if
present) and empty the
water tank. Press the
selection arrow corre-
sponding to "NEXT>";
37
4. "DESCALER (LEVEL A)
AND WATER (LEVEL B)
(fig. 38). Pour the descal-
+
B
er into the tank up to the
level A marked inside the
tank (equal to one 100
ml pack), then add water
B
(one litre) up to level B
A
and put the water tank
back. Press the selection
arrow corresponding to
38 "NEXT>";
5. "EMPTY DRIP TRAY" (fig.
47): Remove, empty
and replace the drip
tray (A14) and grounds
container (A10). Press
the selection arrow cor-
responding to "NEXT>";
6. "POSITION 2l CONTAINER
OK TO START":
39
Place an empty container
the container used to collect the descaler solution. Extract
the water tank, empty, rinse under running water, fill
with fresh water up to the MAX level and put back in the
appliance;
9. "POSITION 2l CONTAINER PRESS OK TO START RINSING":
Place the container used to collect the descaler solution
empty under the coffee spouts and hot water/steam spout
(fig. 8) and press the selection arrow corresponding to "OK
";
10. Hot water is delivered first from the coffee spouts, then
from the hot water/steam spout and "RINSING UNDERWAY"
is displayed;
11. When the water in the tank has run out, empty the con-
tainer used to collect the rinsing water;
40
15. "POSITION 2l CONTAINER PRESS OK TO START RINSING":
Place the container used to collect the descaler solution
empty under the hot water/steam spout (fig. 8) and press
"OK " ;
16. Hot water is delivered from the hot water/steam spout and
"RINSING UNDERWAY" is displayed;
17. "EMPTY DRIP TRAY" (fig. 39): At the end of the second
rinse, remove, empty and replace the drip tray (A14) and
grounds container (A10). Press "NEXT>";
18. "DESCALE COMPLETE": press "OK ";
19. "FILL TANK WITH FRESH WATER": empty the container
used to collect the rinse water, remove the water tank and
fill with fresh water up to the MAX level, then put back in
the appliance.
Descaling is complete.
Please note!
• If the descaling cycle is not completed correctly (e.g. no
electricity) we recommend repeating the cycle;
• After descaling, it is normal for the grounds container
(A10) to contain water.
21
12. "INSERT FILTER IN HOUS-
ING" (fig. 48). Press
"NEXT>" and extract the
water tank. Replace the
water softener filter if
removed previously;
13. "RINSE AND FILL WATER
TANK UP TO MAX LEVEL"
(fig. 5). Fill the tank up to
the MAX level with fresh
water;
14. "INSERT WATER TANK" (fig.
6). Put the water tank
back in the appliance;