Power" Function - ENGO CONTROLS EONEBATW Full Manual

10.3.2 „Power" function
In this option, the user can turn ON / OFF the thermostat from the app without the need to interfere with the power wire. To do so, please follow the
steps below:
1 2 3
Enter the thermostat interface. Select the „Control" option.
You can turn the thermostat on / off
by using „Power" slider
4
5 6
3
...and its display is blank. Press the button to light up the screen. The
message „OFF" will be displayed, which
indicates the status of the thermostat off. If you
want to switch the thermsotat back on, move
the ON/OFF slider at the application or hold the
OK button on the thermostat for 5 seconds.
When the „Power" slider is grayed
out, then the thermostat is off...
EONEBAT FULL MANUAL 23