Table of Contents
Advertisement
6. MAKE THE ELECTRIC
CONNECTIONS
WARNING: To avoid possible electrical shock,
be sure electricity is turned off at the main
fuse box before wiring.
NOTE: This remote control unit is equipped
with 16 code combinations to prevent
possible interference from or to other remote
units. The frequency switches on your
receiver and transmitter have been preset at
the factory. Please recheck to make sure the
switches on transmitter and receiver are set
to the same position, any combination of
settings will operate the fan as long as the
transmitter and receiver are set to the same
position. (Figure 9)
Step 1. (Figure 10) Insert the receiver into the
mounting bracket with the flat side of the
receiver facing the ceiling.
Code switch
ON
ON
Receiver
5
Figure 9
Hanger
bracket
Figure 10
Advertisement
Table of Contents
