Installation Of Safety Support; Make The Electric Connections - Savoy House M2020 Series Owner's Manual

6. INSTALLATION OF
SAFETY SUPPORT
An additional safety support is provided to
prevent the fan from falling. Secure the
safety cable to the ceiling joist with screw
and washer, as illustrated in Figure 11.
7. MAKE THE ELECTRIC
CONNECTIONS
Remember to disconnect the power.
Follow the steps below to connect the fan
to your household wiring. Use the wire
connecting nuts supplied with your fan.
Secure the connectors with electrical tape.
Make sure there are no loose strands or
connections.
Step 1. Connect the fan supply (black) wire
and light supply (blue) wire to the black
household supply wire as shown in Figure
12.
Step 2. Connect the neutral fan (white)
wire to the white neutral household wire.
Step 3. Connect the fan ground wire
(green) to the household ground wire.
Step 4. After connecting the wires, spread
them apart so that the green and white
wires are on one side of the outlet box and
the black and the blue wires are on the
other side.
Step 5. Turn the connecting nuts upward
and push the wiring into the outlet box.
Figures 13 and 14 illustrate the wiring
connections for optional wall control. (The
wire color out of wall control may vary, see
wall control's installation manual for
correct wire connections.)
Hanger bracket
POWER LINES 120V
BLUE
LIGHT
SWITCH
6
Safety cable
Figure 11
GREEN GROUND
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
FAN
WH
BLK
WH
LIGHT
Figure 12
POWER LINES 120V
GREEN GROUND
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
FAN
WH
BLUE
BLK
WH
LIGHT
Figure 13
WIRING
BOX
WIRING
BOX