Using The Ac Adapter - Sharp Actius PC-GP20 Operation Manual

About the Power Indicators
The following indicators show the power status of your computer.
Indicator Light
Power
Battery
Status
2
Battery status indicator is always off when the computer is turned off and not
connected to AC power.
• When the battery is hot, the battery status indicator may turn off and
• For more information on System standby/hibernate, see Chapter 3.

Using the AC Adapter

When connected to a wall outlet, the AC adapter provides power for operation and
charges the battery. The AC input voltage can range from 100 to 240 volts so that you
can use the computer with the appropriate plug adapter.
The AC power cord included with the computer is appropriate for the
voltage used in the area in which you purchased your computer. If you
attempt to connect the computer to a wall outlet other than in this area,
check the voltage of the outlet and use an AC power cord appropriate for
the outlet. Consult local service staff if you are not sure.
2-2
On (green)
Blinking (green)
Off
When On (green)
Connected to
On (orange) Being charged
AC Power
Blinking
(orange)
When Powered Off
by Battery
Blinking
(red)
stay off until the battery becomes cool. (See Charging the Battery Pack
section of Chapter 3 for more information.)
Meaning
Operating (powered by AC power)
In System Standby (when powered by AC
power)
Powered off / in System Hibernate/
powered by a battery pack
Fully charged
In abnormal state. Remove the battery
pack and install it again. (See Chapter 3)
Has power
Almost completely discharged
(The warning beep sounds)