2.
Connect the core end of the DV cable into the IEEE 1394 connector of the
computer and the other end into the DV connector of the IEEE 1394 device.
IEEE 1394 connector
3.
Install the driver according to the instructions on the screen. Generally when you
connect the device to the computer, the necessary driver will be installed
automatically.
4.
Start the appropriate application for handling your data.
Disconnecting IEEE 1394 Device
1.
Click the Safely Remove Hardware icon (
the icon, click
Step 3.
2.
If the name of your device appears, click Safely remove xxxxx (xxxx is the name
of your IEEE 1394 device.); then, Safe To Remove Hardware dialog appears.
3.
Remove the DV cable from the computer.
DV Cable
to show all kinds of icons. If the icon does not appear, go to
To IEEE 1394 Compliant
Device
) on the taskbar. If you cannot find
4
4-13