Fast Start; Connecting Ac Power - Sharp PC-A820 Manual

Fast Start

Your new computer is ready to use as soon as you unpack it from the box. If you're
familiar with computers, follow the instructions in this chapter to get your system up
and running in just a few minutes. If this is your first computer, you should read
through the entire Operation Manual before starting the system.

Connecting AC Power

Run your computer the first time using AC power, rather than battery
power. This ensures that you will not lose power while you complete
the Windows setup operation.
Use only the AC adapter that was supplied with your computer,
or supplied by your computer vendor. You can damage your
computer if you try to use an AC adapter that is not approved for
use with this system.
When removing the AC power cord from a wall outlet, grip the
plug and pull it from the socket. Never remove the power cord
from the outlet by pulling on the cord. Always grip the plug.
Place your computer on a flat working surface and follow the steps below.
1. On the front edge of the computer, slide the cover latch to the right and raise the
cover.
CHAPTER 1
Cover latch
1
1-1